在线咨询
QQ客服
400-860-6021
您好!欢迎来到米欧医疗网站
联系电话400 - 860 - 6021
中文版积分商城 在线商城在线购买
米欧 - 口罩生产厂家 购口罩选米欧,品牌更保障。

产品资讯

当前位置:Home > News Center > 产品资讯
Causes of tearing the conveyor
1: Belt tear caused by imperfect structure of the belt conveyor: Due to the imperfect structure of the belt conveyor, the drop point of the conveyor belt is large, the relative velocity of the impurities in the coal stream is large, the impact force is large, sharp, Hard, long impurities are easily inserted into the conveyor at the blanking point, causing the conveyor belt to tear. 2: Conveyor belt tear caused by blocking material: The transfer chute is small, which easily hinders the tearing of the conveyor belt by materials and impurities. 3: The deviation of the conveyor belt causes the edge to be pulled:






4: Belt tear caused by impurities in the conveying material: The impurities in the conveying material are mainly for the coal port, the coal quality is not good, the large coal in the raw coal and various impurities, such as irons, wooden sticks, etc. This causes 70-80% of the tear, thus ensuring the quality of the source coal is the key to tear prevention. 5: Belt tear caused by improper installation of belt conveyor auxiliary equipment: There are many auxiliary equipments for belt conveyors, the falling of the liner, the sharp irons adsorbed by the iron remover, and the improper installation of the cleaner may cause tearing of the conveyor belt. Scratch, the ordinary conveyor belt has no lateral protection structure and cannot prevent tearing. 6: Returning coal with coils, etc.: In addition, the rubber aging of the conveyor belt joint causes the core layer of the conveyor belt to enter the water, causing the steel rope to be rusted and corrugated.
产品中心 公司介绍 视频展示 相册资质 新闻中心 联系我们 网站地图
热卖推荐
一次性口罩
友情链接
积分商城
米欧输送带

关注我们

微信公众号
微信客服

联系方式

  • 电话 :4 0 0 - 8 6 0 - 6 0 2 1
  • 地址 :浙江省衢州市开化县华埠镇工业园区
  • 邮箱 :1050495560@qq.com
Copyright © 2020 mioubelt.com All Rights Reserved. 开化米欧医疗科技有限公司 版权所有沪ICP备12045437号